AUTOMOTIVE GEAR OILS

Manual Gear Oil: Adopting highly refined mineral base stock with high viscosity index and a variety of good quality additives, MAG Manual Transmission Fluid performs excellence for passenger and commercial vehicles. It meets the OEM specification requirements for manual transmission of various kinds of imported, domestic, commercial and passenger vehicles.

  • ATF-1

    Automatic Transmission ATF-1 Type A - Suffix A

    MAG ATF-1 Type A is a high quality ATF combining high quality solvent refined base stocks with performance chemicals and viscosity modifier. Use as supplied for automatic gearboxes and other gearboxes requiring non-friction modified ATF. Provide good lubrication in automatic and semi-automatic transmission.

    Benefits

    • Specially formulated to satisfy those applications which are designed to use non-friction modified fluids.
    • Also recommended for transmissions which require this type of fluid along with some types of power steering and torque convertor units.
    • It has good level of corrosion and foam properties.
    • Very high viscosity index and very low pour point.
    • Friction properties meet the requirements of type A suffix A.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    Specific Gravity at 15°C kg/L ASTM D-4052 0.88
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 37.5
    At 100C° cst 7.5
    Viscosity Index ASTM D-2270 165
    Flash Point, COC, C° ASTM D-92 198
    Pour Point, C° ASTM D-97 -37
  • ATF-2

    ATF-2 Automatic Transmission DEXRON III-II

    MAG ATF-3 & ATF-2 are automatic transmission fluids for vehicles specifying use of DEXRON II D – III D quality fluids. The high quality base oils and special additive system used in MAG ATF 2 & 3 automatic transmission fluid to provide resistance to oxidation better frictional properties good low temperature fluidity improved seal compatibility and wear production. It is compatible with all common seal materials and exceeds the performance requirements of vehicles need DEXRON specification and provides excellent driving experience in a wide variety of driving conditions. ATF DX II & DX III are also suitable as power steering fluid where a DEXRON 2 fluid is specified.

    Benefits

    • Has good thermo-oxidative stability that minimizes formation of lacquer, sludge & deposits and keeps transmission clean.
    • Controlled frictional characteristics help in consistent, smooth shift in a variety of driving conditions.
    • Improved anti-wear technology protects critical transmission parts against wear.
    • Extremely high viscosity index ensures adequate lubrication in both high operating and low starting temperatures.
    • Better foam control leads to a smooth, lasting shift feel and reduces fluid loss.
    • Enhance low temperature fluidity assist good cold start performance and provides better protection against rust and corrosion.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade D III D II
    Specific Gravity at 15°C kg/L ASTM D-4052 0.86 0.877
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 35.0 37.5
    At 100C° cst 7.2 7.5
    Viscosity Index ASTM D-2270 180 165
    Flash Point, COC, C° ASTM D-92 190 198
    Pour Point, C° ASTM D-97 -40 -37
  • ATF-3

    ATF-3 Automatic Transmission DEXRON III-II

    MAG ATF-3 are automatic transmission fluids for vehicles specifying use of DEXRON II D – III D quality fluids. The high quality base oils and special additive system used in MAG ATF 3 automatic transmission fluid to provide resistance to oxidation better frictional properties good low temperature fluidity improved seal compatibility and wear production. It is compatible with all common seal materials and exceeds the performance requirements of vehicles need DEXRON specification and provides excellent driving experience in a wide variety of driving conditions. ATF DX II & DX III are also suitable as power steering fluid where a DEXRON 2 fluid is specified.

    Benefits

    • Has good thermo-oxidative stability that minimizes formation of lacquer, sludge & deposits and keeps transmission clean.
    • Controlled frictional characteristics help in consistent, smooth shift in a variety of driving conditions.
    • Improved anti-wear technology protects critical transmission parts against wear.
    • Extremely high viscosity index ensures adequate lubrication in both high operating and low starting temperatures.
    • Better foam control leads to a smooth, lasting shift feel and reduces fluid loss.
    • Enhance low temperature fluidity assist good cold start performance and provides better protection against rust and corrosion.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade D III D II
    Specific Gravity at 15°C kg/L ASTM D-4052 0.86 0.877
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 35.0 37.5
    At 100C° cst 7.2 7.5
    Viscosity Index ASTM D-2270 180 165
    Flash Point, COC, C° ASTM D-92 190 198
    Pour Point, C° ASTM D-97 -40 -37
  • Gear Oil GL5

    Gear Oil GL5 SAE 80W90 & 85W140 API: GL 5

    MAG Gear Oil (80W90) & 85W140 (GL5) is an extreme pressure multi-grade gear oil which is based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents. It is developed for the lubrication of spiral bevel and hypoid differentials, it is also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of oil to API GL5 performance level. Gear oil with multi-grade characteristics give wide operating temperature performance.

    Benefits

    • Provides the greatest gear protection available.
    • Reduce differential and gearbox temperatures.
    • Increase differential and gearbox durability.
    • Rapid lubrication even in a very cold weather.
    • Improved shifting in manual transmission.
    • Provide improved drive train efficiency.
    • Prevents foaming even at high speed.
    • Low corrosiveness reduces synchronizer wear.
    • Stable even at elevated temperatures.
    • Can be used in limited-slip and regular differentials.
    • Suitable for competition and street use.
    • Compatible with petroleum and other synthetics.
    • Compatible with seals designed for petroleum.
    • Allow extended drains in non-warranty vehicle.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 85W140 80W90
    Specific Gravity at60/60F° ASTM D-1298 0.90 0.89
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 355.0 150
    At 100C° cst 28.0 17.5
    Viscosity Index ASTM D-2270 95 110
    Flash Point, COC, C° ASTM D-92 230 210
    Pour Point, C° ASTM D-97 -18
  • GL5 SAE 90L5

    GL 5 SAE 90L 5 API : G

    (Not Relevant Text)

    MAG Gear Oil (80W90) & 85W140 (GL5) is an extreme pressure multi-grade gear oil which is based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents. It is developed for the lubrication of spiral bevel and hypoid differentials, it is also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of oil to API GL5 performance level. Gear oil with multi-grade characteristics give wide operating temperature performance.

    Benefits

    • Provides the greatest gear protection available.
    • Reduce differential and gearbox temperatures.
    • Increase differential and gearbox durability.
    • Rapid lubrication even in a very cold weather.
    • Improved shifting in manual transmission.
    • Provide improved drive train efficiency.
    • Prevents foaming even at high speed.
    • Low corrosiveness reduces synchronizer wear.
    • Stable even at elevated temperatures.
    • Can be used in limited-slip and regular differentials.
    • Suitable for competition and street use.
    • Compatible with petroleum and other synthetics.
    • Compatible with seals designed for petroleum.
    • Allow extended drains in non-warranty vehicle.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 85W140 80W90
    Specific Gravity at60/60F° ASTM D-1298 0.90 0.89
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 355.0 150
    At 100C° cst 28.0 17.5
    Viscosity Index ASTM D-2270 95 110
    Flash Point, COC, C° ASTM D-92 230 210
    Pour Point, C° ASTM D-97 -18
  • GL5 SAE 140

    GL 5 SAE 140 API : GL 5

    (Not Relevant Text)

    MAG Gear Oil (80W90) & 85W140 (GL5) is an extreme pressure multi-grade gear oil which is based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents. It is developed for the lubrication of spiral bevel and hypoid differentials, it is also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of oil to API GL5 performance level. Gear oil with multi-grade characteristics give wide operating temperature performance.

    Benefits

    • Provides the greatest gear protection available.
    • Reduce differential and gearbox temperatures.
    • Increase differential and gearbox durability.
    • Rapid lubrication even in a very cold weather.
    • Improved shifting in manual transmission.
    • Provide improved drive train efficiency.
    • Prevents foaming even at high speed.
    • Low corrosiveness reduces synchronizer wear.
    • Stable even at elevated temperatures.
    • Can be used in limited-slip and regular differentials.
    • Suitable for competition and street use.
    • Compatible with petroleum and other synthetics.
    • Compatible with seals designed for petroleum.
    • Allow extended drains in non-warranty vehicle.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 85W140 80W90
    Specific Gravity at60/60F° ASTM D-1298 0.90 0.89
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 355.0 150
    At 100C° cst 28.0 17.5
    Viscosity Index ASTM D-2270 95 110
    Flash Point, COC, C° ASTM D-92 230 210
    Pour Point, C° ASTM D-97 -18
  • Trans 901

    Trans 901 SAE 90 API : GL 1

    MAG Trans 901 Gear Oil SAE 90 is manufactured from a high quality virgin base oil to provide good protection for Automotive Gears.

    Performance Level

    API: GL-1

    Application

    Trans 901 Gear Oil SAE 90 is recommended for Gear Oil where no specific requirements from vehicle manufactures is needed. It is designed for transmissions operating under mild condition and low pressure.

    Benefits

    • It has good level of corrosion resistance and foam properties.
    • Protection against wear and rust prevention.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 90
    Density @ 15 ºC, kg/L ASTM D-1298 0.90
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 279
    AT 100 ºC cSt ASTM D-445 20.5
    Viscosity Index ASTM D-2270 92
    Flash Point COC, ºC ASTM D-92 250
    Pour Point, ºC ASTM D-97 -6
  • Trans 904

    Trans 904 SAE 90 API: GL 4

    Trans EP 904 Gear Oil is manufactured from selected additives in high quality solvent refined mineral oil. Use as reserve for lubrication of transmission systems which preclude the use of extreme pressure (EP) types. Which allow maximum protection for the automotive gears. TRANS EP 904 Gear Oils are in range of heavy duty lubricants developed to meet or exceed international recognized specifications and classifications. TRANS EP Gear Oils are available in viscosities to cover all operating conditions.

    Benefits

    • Outstanding gear protection from the lightest to heaviest viscosities.
    • Compatible with all seal materials used in gearboxes and final drives.
    • Contain the most effective extreme pressure (EP) agents available.
    • Excellent corrosion and oxidation protection.
    • Includes active anti-foam agents to reduce incidence of damage due to air entrainment during use.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 90 140
    Specific Gravity at60/60F° ASTM D-1298 0.89 0.9
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 170.5 420
    At 100C° cst 16.2 25.7
    Viscosity Index ASTM D-2270 95 95
    Flash Point, COC, C° ASTM D-92 225 240
    Pour Point, C° ASTM D-97 -18
  • Trans 1401

    Trans 1401 SAE 140 API : GL 1

    MAG Trans 1401 Gear Oil SAE 140 is manufactured from a high quality virgin base oil to provide good protection for the Automotive Gears

    Performance Level

    API: GL-1

    Application

    MAG Trans 1401 Gear Oil SAE 140 is recommended for gear oil where no specific requirements from vehicle manufactures is needed. It is designed for transmissions operating under mild condition and low pressure.

    Benefits

    • It has good level of corrosion resistance and foam properties.
    • Protection against wear and rust prevention for mild condition.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 140
    Density @ 15 ºC, kg/L ASTM D-1298 0.905
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 460.0
    AT 100 ºC cSt ASTM D-445 29.80
    Viscosity Index ASTM D-2270 90
    Flash Point COC, ºC ASTM D-92 285
    Pour Point, ºC ASTM D-97 -6
  • Trans 1404

    Trans 1404 SAE 140 API : GL 4

    Trans EP 1404 Gear Oil GL 4 SAE 140 is manufactured from a high quality virgin base oil and selected Extreme Pressure EP additives which will allow maximum protection for the wide range of automotives transmissions, axle and final drive.

    Performance Level

    API: GL 4 MIL-L-2105

    Application

    Trans EP 1404 Gear Oil GL 4 SAE 140 is recommended for gear boxes, transfer boxes and axles, where extreme pressure requirements from manufactures is needed.

    Benefits

    • It has good level of corrosion resistance and foam properties.
    • Protection against wear and rust prevention under most severe conditions.
    • Extreme pressure properties.
    • High thermal and oxidation stability.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade 140
    Density @ 15 ºC, kg/L ASTM D-1298 0.91
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 440
    AT 100 ºC cSt ASTM D-445 29.6
    Viscosity Index ASTM D-2270 95
    Flash Point COC, ºC ASTM D-92 240
    Pour Point, ºC ASTM D-92 -12
    TAN, mg KOH/g ASTM D-974 0.35
  • MAG Trans 30

    MAG Trans POWER TO-4 SAE 30

    MAG Trans POWER TO-4 SAE 30 is manufactured from a high quality virgin base oil specifically designed for powershift transmissions, final drive and wet brakes, it is formulated with special additives to provide excellent properties.

    Performance Level

    API: CF-2/CF Caterpillar TO-4 KOMATSU, KES, 07.868.1, ALLISON C-4 ZF TE-ML 03.

    Application

    MAG Trans POWER TO-4 SAE 50 is recommended for transmission oil where no specific requirements from equipment manufacturers when heavy load is required like Caterpillar, Komatsu, and ZF.

    Benefits

    • Excellent protection against Bore Polishing.
    • Very good anti-foam, anti-wear and anti corrosion properties.
    • High thermal and oxidation stability.
    • Extended drain intervals.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade SAE 30
    Density @ 15 ºC, kg/L ASTM D-1298 0.899
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 101
    AT 100 ºC cSt ASTM D-445 11.0
    Viscosity Index ASTM D-2270 95
    Flash Point COC, ºC ASTM D-92 240
    Pour Point, ºC ASTM D-97 -30
    TAN, mg KOH/g ASTM D-974 8.2
  • MAG Trans 40

    MAG TRANS POWER TO-4 SAE 40

    (Not Relevant Text)

    MAG Trans POWER TO-4 SAE 30 is manufactured from a high quality virgin base oil specifically designed for powershift transmissions, final drive and wet brakes, it is formulated with special additives to provide excellent properties.

    Performance Level

    API: CF-2/CF Caterpillar TO-4 KOMATSU, KES, 07.868.1, ALLISON C-4 ZF TE-ML 03.

    Application

    MAG Trans POWER TO-4 SAE 50 is recommended for transmission oil where no specific requirements from equipment manufacturers when heavy load is required like Caterpillar, Komatsu, and ZF.

    Benefits

    • Excellent protection against Bore Polishing.
    • Very good anti-foam, anti-wear and anti corrosion properties.
    • High thermal and oxidation stability.
    • Extended drain intervals.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade SAE 30
    Density @ 15 ºC, kg/L ASTM D-1298 0.899
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 101
    AT 100 ºC cSt ASTM D-445 11.0
    Viscosity Index ASTM D-2270 95
    Flash Point COC, ºC ASTM D-92 240
    Pour Point, ºC ASTM D-97 -30
    TAN, mg KOH/g ASTM D-974 8.2
  • MAG Trans 50

    MAG Trans POWER TO-4 SAE 50

    MAG Trans POWER TO-4 SAE 50 is manufactured from a high quality virgin base oil specifically designed for powershift transmissions, final drive and wet brakes, it is formulated with special additives to provide excellent properties.

    Performance Level

    API: CF-2 Caterpillar TO-4 KOMATSU KES 07.868.1 ALLISON C-4 ZF TE-ML 03.

    Application

    MAG Trans POWER TO-4 SAE 50 is recommended for transmission oil where no specific requirements from equipment manufacturers when heavy load is required like Caterpillar, Komatsu, and ZF.

    Benefits

    • Excellent protection against Bore Polishing.
    • Very good anti-foam, anti-wear and anti corrosion properties.
    • High thermal and oxidation stability.
    • Extended drain intervals.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    SAE Grade SAE 50
    Density @ 15 ºC, kg/L ASTM D-1298 0.91
    Kinematic Viscosity, cSt
    AT 40 ºC cSt ASTM D-445 265
    AT 100 ºC cSt ASTM D-445 20.5
    Viscosity Index ASTM D-2270 92
    Flash Point COC, ºC ASTM D-92 270
    Pour Point, ºC ASTM D-97 -15
    TAN, mg KOH/g ASTM D-974 8.2

Midas Group Pvt. Ltd.
Radha Bhawan Building, Floor #7
Tripureshwor, Kathmandu, Nepal
+977-1-4248492
info@midasgroup.com.np
Sun - Fri: 10 AM - 6 PM