Silk 2000 SAE 40 API: SC/CC

Is a monograde gasoline engine oil, manufactured from a high quality of base oil and selected additives to give good engine protection. It is formulated for mild operational conditions, it has the anti-wear, anti-corrosion, anti-rust and anti-oxidant properties.

Application

SILK 2000 SAE 40 is recommended for use in gasoline engines, for light vehicles are operating under mild service conditions and for material handling machines.

Benefits

• Protection against wear, rust and oxidation.
• Excellent high temperature stability.
• Good detergent / dispersant properties.

Typical Technical Properties

SILK 3500 SAE 40 API: SF/CD

Silk 3500 is engine oil manufactured from a blend of selected high quality base oils and additives. It is particularly suitable for use in engines of older design and engines operating under less severe conditions. The higher viscosity grades are also suitable for use in certain engines in maritime use. The products may be used in certain diesel and petrol engines where the viscosity and performance level is appropriate.

Benefits

• This mono-grade oil gives good oil control and no loss of viscosity due to shear.
• The high level of wear protection and anti-oxidants required in classic and modern are provided.
• It has good detergency and high level of anti-wear additives.

Typical Technical Properties

SILK 2500 SAE 50 API: SC/CC

Silk 2500 Motor Oil is a high performance oil specially designed for old technology engines. Suitable for gasoline or diesel engines. Being a non-detergent type of lubricant is important to ensure that the engine oil is changed within specific short period specially for vehicles that operates under mild service conditions.

Benefits

• High lubricating power which reduces internal frictions.
• High film strength available even in severe conditions.
• Very low detergency does not attach seals. Totally inert towards seal used in the past.
• SAE 50 viscosity grade adapted to vintage cars.

Typical Technical Properties

SILK 3800 SAE 50 API : SF/CD

SILK 3800 SAE 50 is a mono-grade gasoline and diesel engines oil, manufactured from a high quality of base oil and selected additives to give very good engine protection. It has formulated for mild conditions, it has the anti-wear, anti-corrosion, anti-rust, and anti-oxidant properties.

Application

SILK 3800 SAE 50 is recommended for use in gasoline and diesel engines, in passenger car, vans and mini buses that are operating under mild service conditions and for material handling machines.

Specification

• Performance Level
• API: SF/CD
• MIL-L-46152 B

Benefits

• Protection against wear, rust and oxidation.
• Excellent high temperature stability.
• Good detergent, dispersant properties.

Typical Technical Properties

Silk 4000 SAE 20 W 50 API: SF/CC

Silk 4000 is a mineral based engine oil for classic engines. High quality solvent refined base oils with latest technology performance additives and shear stable viscosity index improver. Use for engine lubrication of primarily vehicles both petrol and diesel which were developed on multi-grade oils incorporating modern additive technologies with period visco-metrics to provide the optimum lubrication characteristics for engines.

Benefits

• The 20 W 50 base fluid formulation and special additive system provides maximum engine protection.
• The modern technology ensures multi-grade engine oil can be used for all seasons.
• Also suitable for conventional engines which have heavily loaded skew gears , often due to running high oil pressure.
• Helping to reduce drag and increase power output without any detrimental effects on a centre main bearings.

Typical Technical Properties

SILK 8000 SAE 10W40 API : SL/CF

MAG SILK 8000 SAE 10W40 is a multigrade gasoline engine oil, manufactured from a high quality of base oil and selected additives to formulate a multi-grade oil for all recent technology gasoline engines and light cars diesel engines.

It is recommended for all modern gasoline engines running in severe conditions, on high ways and inside the cities, it has anti-wear, anti-corrosion, anti-rust and anti-oxidant properties, suitable for vehicles equipped with catalysts converter.

Application

MAG SILK 8000 SAE 10W40 is recommended for modern gasoline and diesel engines, for vehicles equipped with catalyst converter for driving in the city and motorway. It is also recommended for use in turbocharged or naturally aspirated diesel engines in cars and light vans. Suitable for operation in all wheather conditions.

Clarification

• Performance Level API: SL/CF, MIL-L-2104E, ACEA A3-98 B3-98/E-3
• Meets Requirements: MB 229.1, VW 505.00

Benefits

• Lubricants for all season.
• Fully compatible with catalytic converter.
• Superior lubrication, reduce fuel consumption and extended engine life.
• Good for high speed driving on motorway as well as city drive.
• Extended oil drain interval.
• Easy starting is extremely cold water.
• Excellent thermal stability, good for operation in high temperature conditions.

Typical Technical Properties

SILK 8000 15W40 API : SL/CF

MAG SILK 8000 SAE 15W40 is a multigrade gasoline engine oil, manufactured from a high quality of base oil and selected additives to formulate a multi-grade oil for all recent technology gasoline engines and light cars diesel engines.

It is recommended for all modern gasoline engines running in severe conditions, on high ways and inside the cities, it has anti-wear, anti-corrosion, anti-rust and anti-oxidant properties, suitable for vehicles equipped with catalysts converter.

Application

MAG SILK 8000 SAE 15W40 is recommended for modern gasoline and diesel engines, for vehicles equipped with catalyst converter for driving in the city and motorway. It is also recommended for use in turbocharged or naturally aspirated diesel engines in cars and light vans. Suitable for operation in all weather conditions.

Specification

• Performance Level API: SL/CF, MIL-L-2104E, ACEA A3-98 B3-98/E-3

Benefits

• Lubricants for all season.
• Fully compatible with catalytic converter.
• Superior lubrication, reduce fuel consumption and extended engine life.
• Good for high speed driving on motorway as well as city drive.
• Extended oil drain interval.
• Easy starting on extremely cold weather.
• Excellent thermal stability, good for operation in high temperature conditions.

Typical Technical Properties

Silk 8000 SAE 20W50 API: SL/CF

Silk 8000 is an engine oil formulated from mineral base oils and a balanced additive package incorporated to give excellent performance in gasoline and passenger car diesel engines. Build lup stronger layer of protection to maintain engine efficiency keeping your car at its peak for longer.

Benefits

• Outstanding thermal stability reduces deposit and sludge formation.
• Excellent operating condition at all seasons and all year time.
• Excellent oil consumption control.
• Superb anti-wear performance protects moving parts and prolongs engine life.
• Catalytic converter compatible.
• Low viscosity and inclusion of friction modifiers give maximum fuel economy.

Typical Technical Properties

Silk X-9000 Semi-Synthetic Oil SAE 10 W 40 API: SL/CF

Silk X-9000 is a semi-synthetic oil that is suitable for fuel injection petrol engines fitted with "blow-by" recirculation and catalytic converters. Also suitable for turbo charges and inter-cooled direct injection diesel engines fitted with blow-by recirculation, it works harder to protect than conventional motor oils by continuously preventing dirt and sludge build up. In addition to offering superior engine protection for all driving conditions, SILK X-9000 cleans and protects for more responsiveness.

Benefits

• Special active cleansing technology, twice as effective at removing sludge from engines with more effect than a normal mineral oil.
• Enhanced oxidation stability.
• Low viscosity, rapid oil flow and low friction, improved fuel efficiency compared to high viscosity oils.
• Hugh shear stability to maintain viscosity and stay in grade throughout the recommended oil drain period.
• Minimizes vibration and engine noise, smoother, quieter drive.

Typical Technical Properties

SILK X-9000 Semi-Syn SAE 10W30 API: SL/CF

SILK X-9000 SAE10W30 is a high performance semi-synthetic multi-grade gasoline engine oil, manufactured from high quality of synthetic & mineral base oil and selected additives to formulate a multi-grade oil for most recent technology gasoline engines. It is recommended for all modern gasoline engines running in severe conditions, specially designed to meet the requirements of the most engines manufacturers. Recommended for all petrol engines (multi-valve and turbo types with or without catalytic converter).

Performance Level:

• API: SL/CF, ACEA A3/B4
• Meets The Requirements: VW 501.01/505 MB 229.01
• Porsche & BMW

Application

SILK X-9000 SAE10W30 is recommended for all gasoline engines, for vehicles are operating under tough service conditions in the city and motorway. It is also recommended for use in turbo-charged or naturally aspirated diesel engines in cars and light vans.

Benefits

• Good thermal stability.
• Recommended for the most severe weather conditions.
• Superior lubrication, reduce fuel consumption.
• Good for high speed driving on motorways and town.
• Extended oil drain interval.
• Easy starting in extremely cold and hot weather.
• High Viscosity Index.

Typical Technical Properties

Silk Sport SM X-5 Synthetic Oil SAE 5 W 30 API: SM/CF

Silk Sport SM X-5 is suitable for use in modern cars and particularly recommended for high performance engines. The full synthetic base fluid ensures that the products are thermally stable and extremely resistant to oxidation even when stressed to the extremes of endurance.

Benefits

• Outstanding thermal stability, reduces deposit and sludge formation.
• Excellent low temperature fluidity gives very rapid oil circulation on cold start.
• Excellent oil consumption control.
• Superb anti-wear performance protects moving parts and prolongs engine life.
• Catalytic converter compatible.
• Low viscosity and inclusion of friction modifiers give maximum fuel economy.
• Extended oil drain interval up to 15000KM.
• Recommended for all seasonal weather conditions.

Typical Technical Properties

Silk Plus SM X-6 Synthetic Oil SAE 5 W 40 API: SM/CF

Silk Plus SM X-6 is an ultra high performance engine oil for today's modern engines which makes specific demands on engine oil. Changes in fuels such as the inclusion of bio-components and changes engine's design for lower fuel consumption and reduced emissions are leading to an evolving development of engine oils.

Silk Plus SM X-6 was developed to satisfy all the requirements of modern high performance engines with and without turbo charging.

Benefits

• Outstanding thermal stability, reduces deposit and sludge formation.
• Excellent low temperature fluidity gives very rapid oil circulation on cold start.
• Excellent oil consumption control.
• Superb anti-wear performance protects moving parts and prolongs engine life.
• Catalytic converter compatible.
• Low viscosity and inclusion of friction modifiers give maximum fuel economy.
• Extended oil drain interval up to 15000KM.
• Recommended for all seasonal weather conditions.

Typical Technical Properties

Silk Plus SMX-6 SAE 5W40 is high performance engine oil blended with high quality of synthetic base oil. It is multi-grade oil recommended for new modern petrol engines.

MAG SILK SPORT X 10W-40

MAG SILK SPORT X 10W-40 is a high performance synthetic multi-grade gasoline engine oil manufactured from high quality blend of base oils and selected additives to formulate a multi-grade oil for most recent technology gasoline engines. It has recommended for all modern gasoline engines running in severe conditions, specially designed to meet the requirements of the most engine manufacturers. Recommended for petrol engines with normal four-stroke valve and turbo types .

Application

MAG SILK SPORT X 10W-40 is recommended for all gasoline engines, for vehicles are operating under severe conditions, all year in the city and motorway. It is also recommended for use in modern gasoline engine where the manufacturer recommends SAE 10W40 oil.

Benefits

• High thermal stability.
• Protection from the most severe weather conditions.
• Superior lubrication.
• Good for high speed driving on motorways and town.
• Extended oil drain interval.
• Easy starting in extremely cold and hot weather conditions.
• Stable oil pressure and high viscosity Index.
• Maximum shear stability.
• Reduce fuel consumption and exhaust emission.

Performance Level

• API: SM/CF, ACEA A3/B3, A3/B4
• VW 502.00/ 505.00, MB 229.1/229.3
• PSA B71 2300, Renault RN 700,BMW, JASO MA 2.

Typical Technical Properties

MAG PRIMA EXTREME SAE 5W-40

MAG PRIMA EXTREME SAE 5W-40 is manufactured by latest technology using synthetic virgin base oil and advanced additives of ILSAC GF-5 performance level for low volatility to provide premium quality of lubricant. It has unique technique in providing full engine protection in all engine cycles (start up, warm up, and normal/ up normal working condition).

It is used for all light and commercial vehicles with direct injection, turbo charges, multi valves and normal engines; in general for low emission engines with high performance level, also, it is compatible for cars using lead free gasoline and catalytic converters. It has intelligent molecules that cling to critical engine parts and provide full protection and cleaning properties by controlling sludge and deposit formation on engine surfaces protection and cleaning properties by controlling sludge and deposit formation on engine surfaces

Application

Meets the Requirements
MB 229.5, RENAULT 700/710, PSA B71 2296

Benefits

• Remarkable detergent and dispersant properties.
• Increase fuel economy by lowering oil consumption due to piston/ring design and oil viscosity.
• Wear and Oxidation premium protection.
• Easy and smooth start up at low temperatures.
• Prevent formation of sludge and contamination.
• Low particulate emissions due to ILSAC GF-5 technology
• Prevent sludge and contamination.

Typical Technical Properties