Hydraulic System Oils

MAG Hydraulic oils are mineral oil based manufactured in a range of viscosity grades to meet the requirements of hydraulic equipment manufacturers for rust and oxidation –inhibited and anti-wear mineral-oil hydraulic fluids. They are compatible with the seal materials commonly used in hydraulic system. These oils are primarily to be used in hydraulic equipment yet still suitable for other duties in which lubricants with good oxidation stability and lubrication performance are required.
  • HYDEN Oil ISO 22

    HYDEN-Hydraulic Oil ISO 22

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75
  • HYDEN Oil ISO 32

    HYDEN-Hydraulic Oil ISO 32

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75
  • HYDEN Oil ISO 37

    HYDEN-Hydraulic Oil ISO 37

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75
  • HYDEN Oil ISO 46

    HYDEN-Hydraulic Oil ISO 46

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75
  • HYDEN Oil ISO 68

    HYDEN-Hydraulic Oil ISO 68

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 68
    Appearance ASTM D-1298 Bright & Clear
    Specific Gravity at 60/60F ASTM D-445 0.88
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 67.5
    At 100C° cst 8.4
    Viscosity Index ASTM D-2270 101
    Flash Point, COC, C° ASTM D-92 228
    Pour Point, C° ASTM D-97 -6
    TAN, mg KOH/g 0.75
  • HYDEN Oil ISO 100

    HYDEN-Hydraulic Oil ISO 100

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75
  • HYDEN Oil ISO 150

    HYDEN-Hydraulic Oil ISO 150

    MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.

    Benefits

    • Gain substantial performance enhancements in Hydraulic Power.
    • Systems Cleaner servo valves, less chances for sticking.
    • Superior thermal stability avoid the formation of sludge even at high temperature.
    • This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
    • Reduce overall impact and footprint on the environment.
    • Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
    • Lower toxic exposures to workers.
    • Superior filterability increases filter life.
    • Multi-metal compatibility under wet and dry conditions.

    Typical Technical Properties

    Physical Characteristics Test Method Typical Value
    ISO Grade Visual 22 32 37 46 68 100
    Appearance ASTM D-1298 B&C B&C B&C B&C B&C B&C
    Specific Gravity at 60/60F ASTM D-445 0.871 0.874 0.875 0.877 0.88 0.885
    Kinematic Viscosity , cst
    At 40C° cst ASTM D-445 22.5 31 36.1 44.2 67.5 99.1
    At 100C° cst 4.4 5.3 5.6 6.6 8.4 11.4
    Viscosity Index ASTM D-2270 105 104 104 103 101 101
    Flash Point, COC, C° ASTM D-92 210 218 220 222 228 230
    Pour Point, C° ASTM D-97 -12 -9 -8 -6 -6 -3
    TAN, mg KOH/g 0.75 0.75 0.75 0.75 0.75 0.75

Midas Group Pvt. Ltd.
Radha Bhawan Building, Floor #7
Tripureshwor, Kathmandu, Nepal
+977-1-4248492
info@midasgroup.com.np
Sun - Fri: 10 AM - 6 PM