Hydraulic System Oils
MAG Hydraulic oils are mineral oil based manufactured in a range of viscosity grades to meet the requirements of hydraulic equipment manufacturers for rust and oxidation –inhibited and anti-wear mineral-oil hydraulic fluids. They are compatible with the seal materials commonly used in hydraulic system. These oils are primarily to be used in hydraulic equipment yet still suitable for other duties in which lubricants with good oxidation stability and lubrication performance are required.
Products
HYDEN-Hydraulic Oil ISO 22
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
HYDEN-Hydraulic Oil ISO 32
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
HYDEN-Hydraulic Oil ISO 37
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
HYDEN-Hydraulic Oil ISO 46
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
HYDEN-Hydraulic Oil ISO 68
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value |
|---|---|---|
| ISO Grade | Visual | 68 |
| Appearance | ASTM D-1298 | Bright & Clear |
| Specific Gravity at 60/60F | ASTM D-445 | 0.88 |
| Kinematic Viscosity , cst | ||
| At 40C° cst | ASTM D-445 | 67.5 |
| At 100C° cst | 8.4 | |
| Viscosity Index | ASTM D-2270 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 228 |
| Pour Point, C° | ASTM D-97 | -6 |
| TAN, mg KOH/g | 0.75 |
HYDEN-Hydraulic Oil ISO 100
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
HYDEN-Hydraulic Oil ISO 150
MAG HYDEN Hydraulic helps energy conserving in pump start up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Benefits
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- Superior thermal stability avoid the formation of sludge even at high temperature.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment’s life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 22 | 32 | 37 | 46 | 68 | 100 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.871 | 0.874 | 0.875 | 0.877 | 0.88 | 0.885 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 22.5 | 31 | 36.1 | 44.2 | 67.5 | 99.1 |
| At 100C° cst | 4.4 | 5.3 | 5.6 | 6.6 | 8.4 | 11.4 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -3 |
| TAN, mg KOH/g | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
