INDUSTRIAL GEAR OILS
AP Oil has a comprehensive range of high quality gear oils including fully synthetic, extreme pressure and general purpose non-EP grades for lubrication of all types of industrial gears and bearing systems.
Products
MAG Industrial Gear Oil AP ISO 68, 100, 150, 220, 320, 460
MAG Industrial Gear Lubricants are premium grade, multi-purpose gear lubricants. They are formulated with a unique extreme pressure additive using an inorganic borate compound. ISO 68, 150, 220, 320 and 460 are formulated with ISO SYN ® base stocks, MAG Gear Lubricants provide outstanding protection against oxidation, corrosion and rust protection. These products are ideally suited for gear sets exposed to extremely high temperatures and loads. The inorganic borate film is composed of compounds that do not adversely react with metal. The film forms promptly to provide superior gear protection and improved thermal stability. By minimizing friction, cooler operating temperatures have been observed, this results longer gear and lubricant life. They provide excellent wear control even in the presence of small amounts of water.
Benefits
- Delivers excellent low temperature properties versus leading all season competitive products for easier cold start-ups and better equipment protection.
- Supports winter requirements grades and summer requirement grades. It is especially recommended for gearboxes exposed to temperature extremes and has sufficient low temperature fluidity to perform well in exposed locations giving you extended drain intervals and minimized down time.
- Recommended for use in all types of enclosed industrial gear drives where an extreme pressure gear oil specified.
- The low viscosity grades of MAG Industrial Gear Oil are effective wire-rope lubricants.
- Prevents seizure, scuffing or spalling of gear teeth and bearing surfaces under shock-loaded conditions.
- Protects copper-containing bearings, bushings, etc., from corrosive attack and prevents over flow from gear boxes and oil reservations.
- Reduces the possibility of cavitations damage to oil circulating pumps where installed.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 68 | 100 | 150 | 220 | 320 | 460 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.880 | 0.885 | 0.89 | 0.894 | 0.898 | 0.903 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 68.0 | 102 | 150 | 220 | 320 | 460 |
| At 100C° cst | 8.5 | 11 | 14.5 | 18.7 | 24 | 30 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -6 |
| TAN, mg KOH/g | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | |
Transformer oil class 1 – class 2
MAG Industrial Gear Lubricants are premium grade, multi-purpose gear lubricants. They are formulated with a unique extreme pressure additive using an inorganic borate compound. ISO 68, 150, 220, 320 and 460 are formulated with ISO SYN ® base stocks, MAG Gear Lubricants provide outstanding protection against oxidation, corrosion and rust protection. These products are ideally suited for gear sets exposed to extremely high temperatures and loads. The inorganic borate film is composed of compounds that do not adversely react with metal. The film forms promptly to provide superior gear protection and improved thermal stability. By minimizing friction, cooler operating temperatures have been observed, this results longer gear and lubricant life. They provide excellent wear control even in the presence of small amounts of water.
Benefits
- Delivers excellent low temperature properties versus leading all season competitive products for easier cold start-ups and better equipment protection.
- Supports winter requirements grades and summer requirement grades. It is especially recommended for gearboxes exposed to temperature extremes and has sufficient low temperature fluidity to perform well in exposed locations giving you extended drain intervals and minimized down time.
- Recommended for use in all types of enclosed industrial gear drives where an extreme pressure gear oil specified.
- The low viscosity grades of MAG Industrial Gear Oil are effective wire-rope lubricants.
- Prevents seizure, scuffing or spalling of gear teeth and bearing surfaces under shock-loaded conditions.
- Protects copper-containing bearings, bushings, etc., from corrosive attack and prevents over flow from gear boxes and oil reservations.
- Reduces the possibility of cavitations damage to oil circulating pumps where installed.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 68 | 100 | 150 | 220 | 320 | 460 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.880 | 0.885 | 0.89 | 0.894 | 0.898 | 0.903 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 68.0 | 102 | 150 | 220 | 320 | 460 |
| At 100C° cst | 8.5 | 11 | 14.5 | 18.7 | 24 | 30 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -6 |
| TAN, mg KOH/g | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | |
Turbine Oil T-32 / T-46 / T-68
MAG Industrial Gear Lubricants are premium grade, multi-purpose gear lubricants. They are formulated with a unique extreme pressure additive using an inorganic borate compound. ISO 68, 150, 220, 320 and 460 are formulated with ISO SYN ® base stocks, MAG Gear Lubricants provide outstanding protection against oxidation, corrosion and rust protection. These products are ideally suited for gear sets exposed to extremely high temperatures and loads. The inorganic borate film is composed of compounds that do not adversely react with metal. The film forms promptly to provide superior gear protection and improved thermal stability. By minimizing friction, cooler operating temperatures have been observed, this results longer gear and lubricant life. They provide excellent wear control even in the presence of small amounts of water.
Benefits
- Delivers excellent low temperature properties versus leading all season competitive products for easier cold start-ups and better equipment protection.
- Supports winter requirements grades and summer requirement grades. It is especially recommended for gearboxes exposed to temperature extremes and has sufficient low temperature fluidity to perform well in exposed locations giving you extended drain intervals and minimized down time.
- Recommended for use in all types of enclosed industrial gear drives where an extreme pressure gear oil specified.
- The low viscosity grades of MAG Industrial Gear Oil are effective wire-rope lubricants.
- Prevents seizure, scuffing or spalling of gear teeth and bearing surfaces under shock-loaded conditions.
- Protects copper-containing bearings, bushings, etc., from corrosive attack and prevents over flow from gear boxes and oil reservations.
- Reduces the possibility of cavitations damage to oil circulating pumps where installed.
Typical Technical Properties
| Physical Characteristics | Test Method | Typical Value | |||||
|---|---|---|---|---|---|---|---|
| ISO Grade | Visual | 68 | 100 | 150 | 220 | 320 | 460 |
| Appearance | ASTM D-1298 | B&C | B&C | B&C | B&C | B&C | B&C |
| Specific Gravity at 60/60F | ASTM D-445 | 0.880 | 0.885 | 0.89 | 0.894 | 0.898 | 0.903 |
| Kinematic Viscosity , cst | |||||||
| At 40C° cst | ASTM D-445 | 68.0 | 102 | 150 | 220 | 320 | 460 |
| At 100C° cst | 8.5 | 11 | 14.5 | 18.7 | 24 | 30 | |
| Viscosity Index | ASTM D-2270 | 105 | 104 | 104 | 103 | 101 | 101 |
| Flash Point, COC, C° | ASTM D-92 | 210 | 218 | 220 | 222 | 228 | 230 |
| Pour Point, C° | ASTM D-97 | -12 | -9 | -8 | -6 | -6 | -6 |
| TAN, mg KOH/g | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | |
